SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED
OVERVIEW - SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED
Saraswathi Moulds And Precision Engineering (Opc) Private Limited is an unlisted private( company incorporated on 22 September, 2020. It is classified as a one person company and is located in Chennai, Tamil Nadu. It's authorized share capital is INR 15.00 lac and the total paid-up capital is INR 1.00 lac.
The current status of Saraswathi Moulds And Precision Engineering (Opc) Private Limited is - Active.
Details of the last annual general meeting of Saraswathi Moulds And Precision Engineering (Opc) Private Limited are not available.
Saraswathi Moulds And Precision Engineering (Opc) Private Limited has one director - Ramarasu Vijayan
The Corporate Identification Number (CIN) of Saraswathi Moulds And Precision Engineering (Opc) Private Limited is U25209TN2020OPC138127. The registered office of Saraswathi Moulds And Precision Engineering (Opc) Private Limited is at GROUND FLOOR, NO. 12, KAMACHI AMMAN KOIL GUINDY,, chennai, Chennai, Tamil Nadu.
One, the company is not active and operating under this name (please check status mentioned below the company name). This could be because it was closed, merged, struck off or is in the process of closing.
Second, it was very recently formed (please check incorporation date) and financial information is not available yet.
You could, however, see its basic information and its directors by scrolling down.
Company360 plans
Know more about your vendors, clients and competitors.
Financials, scores, ratios, excels, reports and more.
@ INR 9000/quarter
Join our newsletter
REGISTERED DETAILS - SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED
CIN
U25209TN2020OPC138127
Incorporation Date / Age
22 September, 2020 / 4 yrs
Last Reported AGM Date
Not Available
Authorized Capital
INR 15.0 Lacs
Paidup Capital
INR 1.0 Lacs
industry*
Manufacturing (Metals & Chemicals and their products)
type
Unlisted Private( Company
category
Company limited by Shares
subcategory
Non-govt company
Registered Address
GROUND FLOOR, NO. 12, KAMACHI AMMAN KOIL
GUINDY,
chennai
Chennai - 600032
Tamil Nadu - India
How to download SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED report
A Company report by Tofler is an easy-to-read PDF report that includes company's financial information, ratio analysis, management, group structure, shareholding pattern and more. Such reports can be bought from company pages at Tofler (Sample) or can be downloaded from Company360. Here is the video showing how a report downloaded from Company360 looks like.
SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED - Registration Details | ||||||
---|---|---|---|---|---|---|
CIN | U25209TN2020OPC138127 | |||||
Incorporation Date / Age | 22 September, 2020 / 4 yrs | |||||
Last Reported AGM Date | Not Available | |||||
Authorized Capital | INR 15.0 Lacs | |||||
Paidup Capital | INR 1.0 Lacs | |||||
industry* | Manufacturing (Metals & Chemicals and their products) | |||||
type | Unlisted Private( Company | |||||
category | Company limited by Shares | |||||
subcategory | Non-govt company | |||||
Email Address | ||||||
Website | ||||||
Registered Address | GROUND FLOOR, NO. 12, KAMACHI AMMAN KOIL GUINDY, chennai Chennai - 600032 Tamil Nadu - India |
Directors - SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED
The company has 1 directors and no reported key management personnel.
The longest serving director currently on board is Ramarasu Vijayan who was appointed on 22 September, 2020. Ramarasu Vijayan has been on the board for 3 years and 12 months.
Ramarasu Vijayan has the largest number of other directorships with a seat at a total of 1 companies. In total, the company is connected to 0 other companies through its directors.
NAME | DESIGNATION | APPOINTMENT DATE | |
---|---|---|---|
RAMARASU VIJAYAN | Director | 22 September, 2020 | No other directorships |
NAME | DESIGNATION | APPOINTMENT DATE | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RAMARASU VIJAYAN | Director | 22 September, 2020 | No other directorships | ||||||||||||
|
Director
Previous Names
No previous names were found for this company. |
Previous CINs
No previous CINs were found for this company. |
SIMILAR COMPANIES
NAME | INCORPORATION YEAR | STATE | PAID UP CAPITAL | |
---|---|---|---|---|
BIRLA TYRES LIMITED
It was formed in year 2018 in West Bengal . The company currently has a paid up capital of INR 1.00 lac.
|
2018 | West Bengal | 1.00 lac | Buy financial reports |
DEVI PREWAT PRIVATE LIMITED
It was formed in year 2016 in Andhra Pradesh . The company currently has a paid up capital of INR 1.00 lac.
|
2016 | Andhra Pradesh | 1.00 lac | Buy financial reports |
EESHA POLYTECH PRIVATE LIMITED
It was formed in year 2019 in Andhra Pradesh . The company currently has a paid up capital of INR 1.00 lac.
|
2019 | Andhra Pradesh | 1.00 lac | Buy financial reports |
VEERAAYA PIPES PRIVATE LIMITED
It was formed in year 2020 in Andhra Pradesh . The company currently has a paid up capital of INR 1.00 lac.
|
2020 | Andhra Pradesh | 1.00 lac | Buy financial reports |
KROW EXPERT SYSTEMS PRIVATE LIMITED
It was formed in year 2021 in Andhra Pradesh . The company currently has a paid up capital of INR 1.00 lac.
|
2021 | Andhra Pradesh | 1.00 lac | Buy financial reports |
AVENIR BIOTECH PRIVATE LIMITED
It was formed in year 2022 in Andhra Pradesh . The company currently has a paid up capital of INR 1.00 lac.
|
2022 | Andhra Pradesh | 1.00 lac | Buy financial reports |
P. R. MERCHANDISE PRIVATE LIMITED
It was formed in year 2016 in Assam . The company currently has a paid up capital of INR 1.00 lac.
|
2016 | Assam | 1.00 lac | Buy financial reports |
AGNI DEVICES PRIVATE LIMITED
It was formed in year 1999 in Delhi . The company currently has a paid up capital of INR 1.00 lac.
|
1999 | Delhi | 1.00 lac | Buy financial reports |
LBS PROCESSORS & PACKERS PRIVATE LIMITED
It was formed in year 2011 in Chandigarh . The company currently has a paid up capital of INR 1.00 lac.
|
2011 | Chandigarh | 1.00 lac | Buy financial reports |
SIGNURA INFRA PRODUCTS PRIVATE LIMITED
It was formed in year 2019 in Bihar . The company currently has a paid up capital of INR 1.00 lac.
|
2019 | Bihar | 1.00 lac | Buy financial reports |
NAME | INCORPORATION YEAR | STATE | PAID UP CAPITAL |
---|---|---|---|
BIRLA TYRES LIMITED | 2018 | West Bengal | 1.00 lac |
DEVI PREWAT PRIVATE LIMITED | 2016 | Andhra Pradesh | 1.00 lac |
EESHA POLYTECH PRIVATE LIMITED | 2019 | Andhra Pradesh | 1.00 lac |
VEERAAYA PIPES PRIVATE LIMITED | 2020 | Andhra Pradesh | 1.00 lac |
KROW EXPERT SYSTEMS PRIVATE LIMITED | 2021 | Andhra Pradesh | 1.00 lac |
AVENIR BIOTECH PRIVATE LIMITED | 2022 | Andhra Pradesh | 1.00 lac |
P. R. MERCHANDISE PRIVATE LIMITED | 2016 | Assam | 1.00 lac |
AGNI DEVICES PRIVATE LIMITED | 1999 | Delhi | 1.00 lac |
LBS PROCESSORS & PACKERS PRIVATE LIMITED | 2011 | Chandigarh | 1.00 lac |
SIGNURA INFRA PRODUCTS PRIVATE LIMITED | 2019 | Bihar | 1.00 lac |
SUBSIDIARY COMPANIES
No Indian subsidiary companies found.
Company Network - SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED
How to use company network of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED
Tofler Company network is a powerful feature that allows you to explore and discover common directorships between companies. It helps you find out other directorships of an Indian director and where else he has business interests. The feature is available for unlimited use in Company360 platform. Here is the video showing how you can explore company networks to discover hidden relationships between companies.
FAQ - SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED
-
What is the Incorporation date of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED?
The Incorporation Date of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED is 22 September, 2020.
-
What is authorized share capital of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED?
The authorized share capital of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED is INR 15.0 Lacs.
-
What is the paid-up capital of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED?
The paid up capital of the SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED is INR 1.0 Lacs.
-
What is the registered address of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED?
The registered address of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED is GROUND FLOOR, NO. 12, KAMACHI AMMAN KOIL
GUINDY,
chennai
Chennai - 600032
Tamil Nadu - India. -
What is the CIN number of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED?
The CIN number of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED is U25209TN2020OPC138127.
-
Who are the directors of SARASWATHI MOULDS AND PRECISION ENGINEERING (OPC) PRIVATE LIMITED?
Saraswathi Moulds And Precision Engineering (Opc) Private Limited has one director - Ramarasu Vijayan
One, the company is not active and operating under this name (please check status mentioned below the company name). This could be because it was closed, merged, struck off or is in the process of closing.
Second, it was very recently formed (please check incorporation date) and financial information is not available yet.
You could, however, see its basic information and its directors by scrolling down.
Company360 plans
Know more about your vendors, clients and competitors.
Financials, scores, ratios, excels, reports and more.
@ INR 9000/quarter
Join our newsletter
Tofler, TWS Systems Private Limited and its officers respect the Intellectual Property Rights of all people. Tofler makes no claim of ownership or affiliation with any trademark (REGISTERED OR UNREGISTERED) that forms part of any Company/LLP name listed on this page. Trademarks, if any, listed on this page belong to their respective owners. Read More